Owning a world-class rifle system is a passport to some of the most breathtaking landscapes in the world. Whether you are trekking through the high deserts of the American West or competing in a precision match in the rolling hills of the Carolinas, your equipment must be an extension of your intent.
But a Gunnr Odin or Thor series optic is only as good as its zero. To help you prepare for your 2026 adventures, we’ve curated the top “bucket-list” shooting destinations and a definitive guide to effectively zeroing your LPVO optic.
- Elite Shooting Destinations for 2026
If you’re looking to push your tactical rifle scope to its limits, these facilities offer the distance and the scenery to make every shot memorable.
- Colemans Creek (Ellerbe, North Carolina)
A premier destination for the East Coast marksman. With ranges stretching out to a full mile, Colemans Creek is the perfect place to test the transition from 1x speed to 10x precision. Their 2026 calendar is packed with PRS matches and “Gas Gun” challenges.
- Cameo Shooting and Education Complex (Palisade, Colorado)
Nestled against the stunning backdrop of the Grand Mesa, Cameo is arguably the finest public shooting facility in the U.S. It features “Steel Challenge” canyons and long-range bays that allow you to use your spotting scope to spot impacts against a red-rock horizon.
- XCAL Shooting Sports (Ashburn, Virginia)
For those who prefer a high-tech, climate-controlled environment, XCAL is a 2026 marvel. It combines a state-of-the-art range with a fitness center and cafe, making it the ultimate destination for “Tactical Wellness” training.
- The Science of the Zero: 50/200 vs. 100 Yards
Before you pack your bags, you need to decide on your zero distance. For the modern LPVO, two philosophies dominate the 2026 circuit:
- The 50/200 Yard Zero: The “General Purpose” choice. For a .223/5.56 rifle, the bullet crosses the line of sight at 50 yards, peaks slightly, and crosses again at 200 yards. This keeps your point of impact within 2 inches of your point of aim from 0 to 250 yards—perfect for fast, “hold-on-target” shooting.
- The 100 Yard Zero: The “Precision” choice. Most Gunnr BDC (Bullet Drop Compensation) and MRAD reticles are designed to be zeroed at 100 yards. This provides a clean starting point for using your reticle’s hash marks to hit targets at 300, 400, or 500 yards.
III. Step-by-Step: How to Effectively Zero Your LPVO
To achieve “one-hole” accuracy, follow this professional zeroing sequence:
Step 1: Mechanical Setup & Boresight
Before firing, ensure your scope is level and torqued to 15–18 inch-pounds.
- Pro Tip: Remove your bolt (for bolt-actions) or look through the upper receiver (for ARs) and align the bore with a target at 25 yards. Adjust your reticle to match that image. This ensures your first shot is “on paper.”
Step 2: The 25-Yard Group
Set your LPVO to maximum magnification. Fire a 3-shot group at 25 yards.
- The Goal: You want to be about 1–1.5 inches low at this distance to be “on” at 50 or 100 yards. Adjust your turrets until your group is centered horizontally.
Step 3: The 100-Yard Confirmation
Move your target to your final zero distance. Fire a 5-shot group, focusing on consistent breathing and trigger squeeze.
- Measurement: Use the grid on your target to measure the distance from your point of aim. If you are using a Gunnr MRAD reticle, use the reticle itself to measure the “MILs” of error and dial the exact number of clicks.
Step 4: Slip the Scales (Reset to Zero)
Once your POI (Point of Impact) matches your POA (Point of Aim), loosen the hex screws on your turret caps and rotate them so the “0” mark aligns with the indicator line. Tighten them down. You now have a visual “Home Base” you can always return to.
- The Gunnr Advantage: Built for the Journey
Whether you are navigating the rugged BLM lands of Nevada or the humid woods of Georgia, your optic needs to hold that zero. The Gunnr Thor and Odin series are built with 7075-T6 aluminum—the same alloy used in aircraft—to withstand 1,000G impacts.
When you combine that durability with Schott ED glass, you aren’t just getting a scope; you’re getting a tool that ensures the zero you set at home is the same zero you have when that trophy buck or match-winning steel target appears.
Ready for the Line
The road to precision begins on the workbench and ends in the field. By mastering your zero and choosing the right destination, you elevate shooting from a hobby to a discipline.